LAZER Z DIESEL REAR DISCHARGE

Our Lazer Z Diesel rear-discharge zero-turn mower is ideal for mowing golf courses, municipalities, and parks, requiring effective clipping discharge control and reduced sound output. Enhanced RED Technology enables key mower systems to communicate, increasing the mower’s productivity, longer machine life, and better fuel efficiency resulting in increased profitability for your landscaping business. Available with a choice of 72-, 96-, or 144-inch UltraCut Rear Discharge cutting decks. The 96-inch and 144-inch cutting decks let you mow up to 11.5 acres per hour. Exmark’s rear discharge mower with flex wings pivot up and down, preventing scalping. The Lazer Z Diesel rear-discharge mowers deliver maximum performance when the going gets tough.

Mower Deck Widths: 72″ 96″ 144″

Equipment Specs

Blade Spindles	No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
Drive Tires	26×12-12, 6ply Multi Trac®
Cup Holder	Standard
Tractor Frame	Welded, heavy-duty 1.5″ x 3″ x 3/16″ tubular steel.
Steering Control	Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires	15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake	Lever-actuated internal wet disc brake.
Seat	Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical	12-volt battery with 55-amp alternator.
Engine Brand	Yanmar
Engine Model	3TNV88C
Engine Displacement	1,642
Engine Series	TNV
Engine Type	Common Rail Diesel
Engine Speed	3,000 RPM
Air Filter	Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type	Diesel
Fuel Capacity	12-gallon (45.4-L), side fuel tanks
Fuel Indicator	Yes – mechanical float type
Drive	Hydro-Drive
Drive Description	Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed	Infinitely variable speed selection from 0–12.5 mph (20 kmph) forward, 0–7 mph (11 kmph) reverse.
Carb Compliant	Yes
Deck Lift	Hydraulic
Safety Package	Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS	2-post foldable ROPS standard with seat belt and latch.
PTO Engagement	Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release	Allows unit movement without engine running.
Casters	.50″ thick caster yoke arms.
Model Description	Lazer Z Diesel 37 HP** Yanmar 3TNV88C Diesel w/96″ UltraCut RD Deck, Susp Seat & 15″ Semi-Pneum
Width / Cutting Deck	72″, 96″ and 144″
Deck Style	Floating Deck
Deck Style Description	Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with finish cut baffles installed.
Deck Construction	7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed	Approximately 18,100 fpm
Cutting Heights	1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments.
Blades	4 Blades at 24.50″ Length
Width	101.2 in. (257.0cm), 72.5 in. @ 3 in. HOC when folded
Length	97.3 in. (247.9 cm)
Height	72.5 in. (244.6 cm)
Curb Weight	2584