LAZER Z E-SERIES

The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60 or 72 inch widths. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.

Mower Deck Widths: 48″ 52″ 60″ 72″

Equipment Specs

Blade Spindles	No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
Drive Tires	24 x 12-12, 4 ply Super Turf®
Cup Holder	Standard
Tractor Frame	Unibody, welded, heavy-duty 1.5″ x 3″ tubular steel.
Steering Control	Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires	13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake	Lever-actuated disc brake.
Seat	Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical	12-volt battery with 15-amp alternator.
Engine Brand	Kawasaki®
Engine Model	FX751V
Engine Displacement	852
Engine Series	V-Twin
Engine Type	Carbureted
Engine Speed	3,750 RPM
Air Filter	Heavy-duty canister air filtration system
Fuel Type	Gas Carbureted
Fuel Capacity	8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator	Yes – electronic Sender
Drive	Hydro-Drive
Drive Description	Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed	Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant	No
Deck Lift	Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package	Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS	2-post foldable ROPS standard with seat belt and latch.
PTO Engagement	MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release	Allows unit movement without engine running.
Casters	.50″ thick caster yoke arms.
Model Description	Lazer Z E-Series 24.5 HP* Kaw FX751V w/60″ UltraCut Deck Series 4 Deck, Susp Seat & Wide Semi-Pneum
Width / Cutting Deck	48″, 52″, 60″, and 72″
Deck Style	Floating Deck
Deck Style Description	Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction	10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed	Approximately 18,500 fpm.
Cutting Heights	1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s seat.
Blades	3 Blades at 20.50″ Length
Width	72.8 in. (184.9 cm)
Length	83.1 in. (211.1 cm)
Height	70 in. (177.8 cm)

Call for Pricing

Similar Products

COMMERCIAL 21 S-SERIES

RADIUS S-SERIES REAR DISCHARGE

COMMERCIAL 21 X-SERIES

LAZER Z DIESEL REAR DISCHARGE

RADIUS E-SERIES

LAZER Z X-SERIES RED TECHNOLOGY

QUEST S-SERIES

Commercial 30 X-Series