TURF TRACER S-SERIES

With the Exmark Turf Tracer S-Series, you can choose from a variety of rugged engines. Then, match that power to cutting decks in 36-, 48-, and 52-inch widths. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.

Mower Deck Widths: 36″ 48″ 52″

Equipment Specs

Steering Control	Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Casters	.38″ thick caster yoke arms
Front Caster Tires	9 x 3.5-4, smooth-tread, semi-pneumatic.
Drive Tires	16 x 6.5-8, 4-ply Turf Master®
Safety Package	Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Parking Brake	Lever-actuated mechanical compression.
Electrical	No battery, recoil start w/ 5 amp clutch coil
Cup Holder	No
Engine Model	FS481V
Engine Brand	Kawasaki®
Engine Series	V-Twin
Engine Speed	3,600 rpm
Air Filter	Standard Engine Manufacturer’s air filter
Drive Description	Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1″ (2.54 cm) tapered shafts.
Speed	Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
PTO Engagement	Electromagnetic 105 ft-lbs clutch.
Fuel Capacity	5-gallon (18.9-L) fuel tank.
Drive Wheel Release	Allows unit movement without engine running.
Deck Lift	Manual lift with hairpin from hole to hole for position adjustment.
Engine Type	Carbureted
Engine Displacement	603
Drive	Hydro-Drive
Fuel Indicator	None
Carb Compliant	Yes
Fuel Type	Gas Carbureted
Model Description	Turf Tracer S-Series 14.5 HP* Kaw FS481V w/36″ UltraCut Series 3 Deck
	*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
	**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
Deck Style	Floating Deck
Deck Style Description	Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck	36″, 48″ and 52″
Deck Construction	10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Cutting Heights	1.5″ (3.8 cm) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments.
Blade Spindles	No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
Blade Tip Speed	Approximately 18,500 fpm.
Blades	2 Blades at 18.00″ Length
Width	47.5 in. (120.7 cm)
Length	77.7 in. (197.4 cm)
Height	42.0 in. (106.7 cm)
Curb Weight	573

Call for Pricing

Similar Products

VXX999GKA60600

LRS801GKA724A1

VXX999EKA72600

LRX980EKC726Q1

LZV060B2360A00

LZS80TDYM604W0

LRX921GKA606Q1

TTX730EKC52400