By virtually any measure, the Turf Tracer X-Series represents the definitive, full-featured hydro mower. Whether you choose the 52- or 60-inch cutting deck, the UltraCut™ Series 4 with splined spindle blade driver is up to the toughest jobs. As are the X-Series engines—Kohler® EFI, and Kawasaki®. Ground speeds up to 6.75 mph, and up to 2.25 in reverse, also rank the Turf Tracer X-Series among the most productive mowers in its class.
Mower Deck Widths: 52″ 60″
Equipment Specs
| Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
| Casters | .38″ thick caster yoke arms |
| Front Caster Tires | 11 x 4.0-5, smooth tread, semi-pneumatic. |
| Drive Tires | 18 x 8.5-8, 4-ply Turf Master® |
| Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine |
| Parking Brake | Lever-actuated mechanical compression. |
| Electrical | 12-volt battery with 20-amp alternator. |
| Power Components | |
| Engine Model | ECV650 |
| Engine Brand | Kohler® |
| Engine Series | Command™ EFI |
| Engine Speed | 3,600 rpm |
| Air Filter | Heavy-duty canister air filtration system |
| Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1″ (2.54cm) tapered shafts. |
| Speed | Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse. |
| PTO Engagement | Electromagnetic 200 ft-lbs clutch. |
| Fuel Capacity | 5-gallon (18.9-L) fuel tank. |
| Drive Wheel Release | Allows unit movement without engine running. |
| Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. |
| Engine Type | Electronic Fuel Injected |
| Engine Displacement | 694 |
| Drive | Hydro-Drive |
| Fuel Indicator | None |
| Carb Compliant | Yes |
| Fuel Type | Gas EFI |
| Model Description | Turf Tracer X-Series 21 HP* Koh EFI ECV650 w/60″ UltraCut Series 4 Deck |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width / Cutting Deck | 52″ and 60″ |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength. |
| Cutting Heights | 1.5″ (3.8 cm.) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments. |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Blades | 3 Blades at 20.5″ Length |
| Width | 73.0 in. |
| Length | 84.8 in. |
| Height | 45.0 in. |
| Curb Weight | 760 |
Similar Products
TURF TRACER S-SERIES
With the Exmark Turf Tracer S-Series, you can choose from a variety of...